By Jakub Wolanski, Founder, CirculaTech
Your erasure certificate should name the method used on each device, the standard that method comes from, and how the result was verified. Since NIST SP 800-88 Rev. 2 now refers organisations to IEEE 2883 for technique, certificates that cite only “NIST 800-88” may no longer tell an auditor much.
What is the difference between NIST SP 800-88 and IEEE 2883?
They answer different questions. NIST SP 800-88 is guidance on running a media sanitisation program: categorising data, deciding the level of sanitisation, validating results and keeping records. IEEE 2883 is a technical standard that describes how storage sanitisation is performed on different media and interfaces, including HDDs, SSDs and NVMe drives.
Put simply, NIST helps you decide what needs to happen and prove that you did it. IEEE 2883 describes how the technique should work on the hardware in front of you.
What changed in NIST SP 800-88 Rev. 2?
Revision 2, published in 2025, moved away from the device-by-device technique tables of the earlier revision and points organisations to IEEE 2883 for technical detail. We covered the wider changes in our earlier post, NIST SP 800-88 Revision 2: What Changed for Certified Data Destruction. The practical effect for buyers is that “NIST-compliant” on its own is a thinner claim than it used to be. The better question is which technique was applied to which media, and under which standard.
How do Clear, Purge and Destruct fit in?
IEEE 2883 describes three sanitisation methods: Clear, Purge and Destruct. In general terms, Clear uses logical techniques to overwrite user-addressable storage, Purge uses stronger techniques intended to make recovery infeasible even with laboratory methods, and Destruct physically destroys the media. Which one is appropriate depends on the sensitivity of the data and what happens to the device next. Devices destined for resale or reuse typically require a method that leaves them working, which is why software-based Purge is common for reuse pathways, while physical destruction suits media that has failed or holds the most sensitive data.
Note that terminology differs slightly between documents (NIST uses “Destroy” where IEEE uses “Destruct”), so check that your provider’s paperwork uses terms consistently.
What is IEEE 2883.1-2025?
IEEE 2883.1-2025 is a recommended practice that sits alongside the 2022 standard. It adds guidance on choosing a sanitisation level using a risk-based approach, and considers the stages of a device’s life, from internal reuse through to external resale and disposal. It is guidance rather than a replacement for IEEE 2883-2022. As the full texts are paywalled, buyers who rely on them for contract terms should read the originals rather than vendor summaries.
What should a data erasure certificate include?
A certificate that supports an audit typically records:
- The device identifier, such as serial number and asset tag
- The sanitisation method (Clear, Purge or Destruct) and the standard it was performed against
- The software or tool and its version
- The date and time of the erasure and the operator or system that ran it
- The verification result, and any exceptions (for example, a drive that failed erasure and followed the exception path)
- A tamper-evident or digitally signed record you can retain
If a device could not be erased, that fact should appear on the record, not be hidden. We cover that pathway in What Happens When a Drive Fails Erasure?.
How does CirculaTech approach this?
CirculaTech uses Blancco software-based certified erasure, which issues a digitally signed, audit-ready certificate for each device. Blancco’s erasure software is certified against more than 25 recognised standards, including NIST, IEEE and ISO standards; those certifications belong to the software, not to CirculaTech. Devices travel to erasure in tamper-sealed packaging with unique seal IDs, collected by a tracked tier-one courier, so the certificate is backed by a documented chain of custody. See Security & Compliance for how the process fits together.
FAQ
Is NIST SP 800-88 still relevant if IEEE 2883 exists?
Yes. NIST remains the governance reference for categorising data, choosing a sanitisation level, verifying outcomes and keeping records. Rev. 2 relies on IEEE 2883 for technical method.
Does IEEE 2883 replace NIST 800-88?
No. They are complementary: NIST covers the program, IEEE 2883 covers technique.
What do Clear, Purge and Destruct mean?
They are the three sanitisation methods in IEEE 2883: logical overwrite of addressable storage (Clear), stronger techniques intended to prevent recovery even with laboratory methods (Purge), and physical destruction of the media (Destruct).
What should I ask my ITAD provider about erasure standards?
Ask which method is used for each media type, how the level is chosen, how results are verified, whether certificates are issued per device with serial numbers, and how failed drives are handled and recorded.
Can a certificate prove compliance with the Privacy Act?
A certificate is evidence that reasonable steps were taken to destroy or de-identify personal information, which is relevant to APP 11. It does not by itself establish compliance; that depends on your wider controls. This is general information, not legal advice.